Tuesday, January 10, 2012

INSTRUMENTAION SIGNAL CABLES


INSTRUMENTAION SIGNAL CABLES


Applications
-
Instrumentation Cables are specially designed to transmit signals without any external interference. They are used in Data Acquisition Systems, connections to Insruments, Computer Networking, PA Systems, Digital Control / Measuring & Communication Systems.
Construction
-
Cores, pairs, triads or quads
Conductor
-
Electrolytic grade copper Bare / Tinned, Solid / Standered / Flexible conductors
Range
-
0.5 / 0.75 / 1.0 / 1.5 / 2.5 Sq.mm upto 48 pair
Voltage Grade
-
Upto 1100 V
Primary Insulation
-
General purpose PVC / Heat Resistant PVC / LDPE / XLPE / PTFE / Fibre Glass
Screening
-
Individual and / or overall with Aluminium Mylar / Copper Tape or Braided with Bare, Tinned or Nickel Coppper / Stainless Steel
Inner Sheath
-
PVC / HRPVC / LDPE / PTFE / FRPVC / FRLSPVC / FIBRE GLASS.
Armour
-
Gi round Wire / Flat strip
Outer Sheath
-
PVC / HRPVC / FRPVC / FRLS PVC / ZHFR / LSF / PTFE / Fibre Glass
Standards
-
BS-5308 PART 1 & 2, BS-7655, IEC-189(1 & 2), VDE-0815 & 0816 and IEC-60332
Rip Cord
-
For easy removal of sheath
Additional Features
-
Communication pairs, Bi-colour extrusion
Note:- These cables are also designed as Data Analogue cables.






TECHNICAL DATA
Conductor Resistance at 20o C Ohms/Km
Conductor Size mm2
0.5
0.75
0.1
1.5
2.5
Maximum Resistance
39.0
26.0
19.5
13.3
7.98
Capacitance nf/Km
Between conductors
Less than 250 nf/km
Between conductors & screen
Less than 400 nf/km
Inductance mH/Km
Less than 1.0
L/R Ratio ยตH/Ohm
Coductor Size mm2
0.5
0.75
1.0
1.5
2.5
L/R
<25
<25
<25
<40
<40
Insulation Resistance at 20o  C M ohm-Km
PVC
More than 100
LDPE
More than 5000
Electostatic noise rejection ratio
More than 76.0 db

No comments:

Post a Comment